Painting Top of House near Electric Wires

Here you'll find a wide range of discussions on old-house topics.

Moderators: oldhouse, TinaB, Don M, Schag

Posts: 401
Joined: Wed Sep 14, 2005 3:49 pm
Location: Ambler, PA

Painting Top of House near Electric Wires

Post by leowis1 »

Hello All,

I'm having the top of my very old house painted by a painter, whom by his language I'm guessing does not have liability insurance. You know what I'm talking about! The guy is doing a great job. He's way up there on a 32' ladder scraping, sanding, caulking, and painting. Better him them me.

He will soon meet the electric wires that come into my house from the pole. Scary stuff. Especially with an aluminum ladder. I called the electric company and their going to put rubber sleeves around the wires, but that'll take a few weeks. I'm going to tell me painter to just stay away from that thing. I'll have to paint it....gulp! My question is this, once the rubber sleeves are in place, is it safe to go near this thing? Or should I just get spray paint and stay as far away as possible? The wires come in where there's dental molding, and I'm having each block painted differently. So a spray paint job will look awful, but that's a price I'm willing to accept to be safe.

Let me know what you think. Thanks!


Posts: 237
Joined: Mon Jan 26, 2004 4:04 pm
Location: Ohio

Post by Bryan »

I have never done what you are looking at, but as an engineer, I'll tell you that you don't have to actually touch a wire to be shocked. Depending on the difference in voltage, electricity can arc through the air. If you are using a metal ladder and it is a humid day outside, that distance would grow. I have seen 440 volts arc over a foot! Please be careful, can the power company turn off the power for a few hours? I guess that depends on where the junctions are and who it would affect. Maybe someone here has some practical experience with this.

Posts: 4733
Joined: Tue Jun 28, 2005 9:50 am
Location: Northeast

Post by lrkrgrrl »

Yikes. Bryan is right: you should only use fiberglass ladders for working around electrics. It's much, much safer. If you don't have one, rent one.

Posts: 2348
Joined: Sun Feb 26, 2006 12:29 am
Location: Georgetown, DE

Post by Abuela »

I'm getting my current house painted around the wires, and I've already decided that I'm just going to have the power turned off on that day.
"Finished" is all a state of mind. ~Angolito

People will forget what you said, people will forget what you did, but people will never forget how you made them feel.” -Maya Angelou

My house journal:

Posts: 401
Joined: Wed Sep 14, 2005 3:49 pm
Location: Ambler, PA

Post by leowis1 »

I called the electric company about this matter. They said that they would put rubber sleeves around the wires. I requested that the electric be turned off. I don't want to learn the hard way the do's and don'ts of these things. They said that they will not turn the power off to a house, instead they'll "relocate" the gizmo somewhere else (around a chimney). I said fine! Just get it away from me. This will take a few weeks before they come out. I'll just have to paint that little section when that time comes.

Jack Willard
Posts: 911
Joined: Wed Dec 10, 2003 11:05 am
Location: Grass Valley, California

Post by Jack Willard »

Having taken a course last year on the dangers of both high and low voltage, I can tell you that I certainly learned that I am NOT WILLING to take the chance! I saw the video of the guy on an aluminum ladder getting roasted doing exactly what you are talking about! TURN THE POWER OFF!. :!:

Spray paint is a REALLY bad idea. High voltage will arc across spray paint just as if it were a wire if offers a path to ground. :twisted:

After I took that course, I started thinking REAL hard about the power feed to the house. I went out to look and be sure. The power is fed through underground conduit up to the electric service panel box. Great! I'm safe! :D

Reading the safety manual on my 50' boom lift made it real clear too. Do NOT get any closer than ten feet from any power lines!

I now think way different about electric service panel boxes too. That course was enough to scare the crap out of anybody! :twisted:

Be way careful. :!:
Jack Willard
ImageOn the way to California in 1972

Posts: 236
Joined: Thu Nov 04, 2004 9:45 am
Location: Greenville, NC

Post by jtjgvle »

50' boom lift!!! I am jealous! If I had one of those my house would be painted, and the limb that has gently come to rest on the peak of my very steep roof would be off!!!

Posts: 401
Joined: Wed Sep 14, 2005 3:49 pm
Location: Ambler, PA

Post by leowis1 »

I saw the video of the guy on an aluminum ladder getting roasted doing exactly what you are talking about!
HOLY ****!!!!

I'm not going near it. I'll tell my guy to stop when he gets to within 10 feet. If I have to get up there in the near distant future AFTER the power company "relocates" the wires, painting an extra 5 feet is a no brainer. I will stay away from it. Promise!

Posts: 197
Joined: Mon Mar 06, 2006 12:16 pm
Location: Chardon,Ohio

Post by dennis »

I'm not sure if I should feel really brave and adventurous, or really stupid.

I work around those lines all the time, with an aluminum ladder. :(

Posts: 1167
Joined: Mon Feb 20, 2006 10:47 pm
Location: Oak Park, IL

painting near wires

Post by kec01 »

Your local electric company should wrap the wires with rubber sleeve type things at no cost to you. They should put a line of them in place that more than covers the length that your painter will be working near. And, if the wires still are really near your house, the utility can also put an L shaped wood thingie in place that will push/pull the wrapped wires away from the house. I wouldn't let the painter get near that area until this is done. Our old house's chimney was about 10" away from the wires. We needed tuckpointing done and Xcel Energy in St. Paul did this easily and with short notice.

Post Reply