dcsimg

How to paint a Metal - Tin Roof

This is where frequently asked questions (FAQ) are posted and links to resources can be saved.
(Posting by permission only)

Moderators: oldhouse, Schag, Greg

Postby HB on Tue Nov 06, 2007 12:33 pm

Hi Danno - Here's the breakdown:

Rust inhibitor - brushed on, Standing seams and welded seams first and then the whole roof, so all seams actually got 2 coats.

Primer - Same as rust inhibitor.

First coat of paint (red in color) brushed the standing seams only, rolled the remainder of the roof with a heavy nap roller on an extension pole. Standing seams got two coats of the first color through this method, once by brush, once by roller.

Final coat of paint (bronze) - rolled the whole thing with a heavy nap roller. I generally rolled the standing seams first and then the flat portions, so again, the standing seams got a little more attention and coverage.

Hope this helps.

HB
HB
 
Posts: 1644
Joined: Wed Dec 10, 2003 12:24 pm
Location: Reading - PA

Postby Schag on Wed Dec 12, 2007 5:13 pm

Is everyone done with this thread?
I want to put it in the reference section.
Schag
Moderator
 
Posts: 1948
Joined: Mon Jan 03, 2005 3:01 pm
Location: North Little Rock, AR (Park Hill)

Previous

Return to The Old House Reference Forum

Who is online

Users browsing this forum: No registered users and 0 guests